Subtotal: 2.690,00  Se kurvKasse

Kurv / 2.690,00  1 × Creality Ender 5 1 × 2.690,00.
Subtotal: 2.690,00  Se kurvKasse.
1 × Creality Ender 5 1 × 2.690,00.
Subtotal: 2.690,00  Se kurvKasse.
Anycubic Photon S DLP.
3.999,00  3.599,00  incl.
Ikke på lager Fragt fra 39,- fri fragt ved køb over 500,- Beskrivelse.

The original Anycubic Photon was a phenomenal success

hitting the mark as an affordable hobbyist resin printer like no other.
Excellent print quality and simple user operation made it a go-to for those in need of detailed prints and cost less.
Photon slicer brings extraordina ry using experience.
A 30M stl file will minutes when you use a open-source slicer.

While photon Slicer will finish this job wthin 1 minutes

Anycubic Photon-S Highlights 2.8″ Full Color Sensitive Touch Screen for real-time previews of print status.
Inbuilt Offline printing.

Rapid Slicer- Photon S Workshop

It is superior in terms of slicing speed and operational experience.
Ultimate Slice Speed .

Matrix UV Lights Upgraded UV Module for stable signal transmission

efficient utilization of resin energy and Amazing Print/cure results.

Dual Z Axis Linear Rail for stronger stability

Anti-aliasing built in to firmware smooths the edge of pixels making the print resolution higher than it actually is.
2K LCD Masking Screen 2560*1440(2K) HD masking LCD gives very fine printing details down to few micrometers.

Aluminum Build Platform to enhance adhesion

Creative structure offers more easiness to leveling: Lower the platform down to the screen; Feel the resistance when pulling the paper in-between; Tighten one screw; Leveling done.
Dual Filtration System: Inner air-purification system with activated carbon to filtrate bad smell and keep air clean.
Dual Fans for Ventilation.
Guaranteed for Noise free 3D Printing .
Suitable for UV Resin.

Anycubic Photon-S offers a SD card reader and USB connectivity

PrimaCreator Resins works great with Photon S

Printing Technology: LCD-based Masked Stereolithography (MSLA)/LCD Shadow Masking.
LCD: 5.2-inch 2K.

Build Volume: 115 x 65 x 165 mm

Z-Layer Resolution: 10 microns (recommended)

XY Resolution: 47 microns.
UI: 2.8-inch Color TFT touchscreen.
Connectivity: USB.
Build Platform Leveling: Manual.

Materials: Resins suitable for 405nm LCD-based printers

Bundled software: Photon Workshop.
File types: STL.
Weight: 5.9 kg.
Dimensions: 230 x 200 x 400 mm.

Everything you need to start printing is included Anycubic Photon DLP printer

Resin 250ml bottle.
USB Memory.
Power Cord.
Power Supply.
Tool kit.
Rubber gloves.
FEP Film.
Yderligere information.
Build Volume 115x65x165mm Producent Anycubic Type Resin Printer Relaterede varer.
CreatBot F160 9.999,00  incl.
moms Tilføj til kurv Creality 3D CR-10S 3.899,00  incl.
moms Tilføj til kurv Zortrax M300 3D Printer 24.599,00  19.999,00  incl.
moms Tilføj til kurv CreatBot DX Plus 19.999,00  17.999,00  incl.
moms Tilføj til kurv.
Copyright 2020 © ApS | Gilmoseparken 62 | 7400 Herning | CVR: 32297846.

Your email address will not be published.

Tham gia Nhà cái slot 9club